Pneumatic Cylinders, Standard Cylinders, Compact Cylinders, Mounting & Accessories, ISO Cylinders, Mumbai, India  
 
 
       

Pneumatic Cylinders

Pneumatic Cylinders
 

Pneumatic Cylinders

STANDARD CYLINDERS
MODE SELECTION CHART

* * *
BORE

* *
MOUNTING

* * * *
STROKE

* *
EXTRA MOUNTING

11/2" (15)

Rear Pivot (RP)

50

Single Pivot (SP)

2"  (20)

Front Pivot (FP)

:

ROD End (RE)

21/4"  (22)

Front Flange (FF)

100

Fork (F)

21/2" (25)

Rear Flange (RF)

:

Double Ended (DE)

3" (30)

Foot MTG (FM)

200

 

4" (40)

Neck MTG (NM)

:

 

5" (50)

Centre Trunion (CT)

1000

 

6" (60)

Basic (B)

:

 

8" (80)

 

 

 

10" (100)

 

 

 

12" (120)

 

 

 

14" (140)

 

 
 
e.g. 11/2" Bore X 400 mm Stroke Rear Pivot with Fork is represented as (15 RP 400 F).
 
Technical Characteristics :
■
Media : Air
■
Mountings & Accessories
■
Seals : Nitrile, Viton on request.
■
Temperature : 0c to 80c (For Nitrile Seals)
■
Piston : Upto 4" Aluminium & from 5" to 14" cast iron.
■
Pressure: 0.5 to 10.2 kgf/cm, high pressureon request.
■
Piston Rod : En-8 (Ground & Hard Chrome Plated) SS 304 on request
■
End Covers : Up to 4" Aluminium Die Casted & powder coated.
From 5" to 14" close grain cast iron & powder coated.
■
Cylinder Barrel : Upto 4" Dia. Brass, Aluminium, MS (Honed & Hard Chrome Plated) 
From 5"dia. To 14" dia. MS (Honed & Hard Chrome Plated) Powder Coated on request.
  Pneumatic Cylinders, Standard Cylinders, Compact Cylinders, Mounting & Accessories, ISO Cylinders, Mumbai, India
   

-------------------------------------------------------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------------------------------------------------------